H06-2 Weldable primer for epoxy zinc-rich workshop (two-component)


All categories
Number of views:

Product name:
H06-2 Weldable primer for epoxy zinc-rich workshop (two-component)

Summary: The data, uses and recommendations of the above products are given based on tests and practical experience, and can be used as a reference during construction. This product is only suitable for professional use, use other than the formulation and construction without our knowledge, we only guarantee the quality of the coating itself. With the development of products and the accumulation of experience in use, we have the right to modify the instructions without notice.
Retail price
Market price
Number of views:
Product serial number
Technical index
Composition It consists of modified epoxy resin, polyamide adducts, ultra-fine zinc powder, various additives, curing agents, organic solvents, etc. It is packaged in two components.
Characteristic The paint film is hard, abrasion-resistant, and excellent in rust resistance. It provides cathodic protection for the partially damaged area. When the welding is cut, the burn-out area is small, and the paint film thickness is within the specified range without affecting the welding performance.
Use It is a special anticorrosive primer for dry and wet gas cabinets.
Painting method Brush, roll, spray.
Colour Gray
Theoretical dosage 180g / m2,12.78m2 / L (based on 40μm dry film, without loss)
Match A: B = 10: 1
Thinner and dilution ratio Special thinner for epoxy anticorrosive coating, 5-8%
Maturation time 23 ± 2 ℃ 0.5-1 hour
Drying time 23 ± 2 ℃ Not more than (h) Surface dry: 1 Hard dry: 24
Applicable time 23 ± 2 ℃ more than 8 hours
Painting interval 23 ± 2 ℃ minimum 5 hours, maximum 7 days
Surface treatment The surface of the steel should be sandblasted or mechanically derusted to meet the Swedish derusting standard Sa2.5.
Recommended painting number 1-2 channels
Back road supporting Epoxy resin coating, epoxy asphalt coating, chlorinated rubber coating, acrylic resin coating, alkyd resin coating, phenolic resin coating, polyurethane coating, chlorosulfonated polyethylene coating, high chlorinated polyethylene coating, etc.
Shelf life 12 months


Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Leave message

If you are interested in us, welcome your message, we will reply you in time!

Username used for comment:

Contact Us

Address: 2069 Longcheng Avenue, Zhonglou District, Changzhou City, Jiangsu Province

News Center   >

mobile website

 Mobile Website

Jiangsu AMB Tongfeng Coatings Co., Ltd. All Rights Reserved.     苏ICP备19046369号       Powered