Number of views:
Product name： H52-65 Epoxy coal tar thick slurry antirust paint
Number of views:
Product serial number
Back to list
|Two-filled coatings formulated from epoxy resin, coal tar pitch, pigments, fillers, curing agents, solvents, etc. When used in proportion.
|The paint film is tough, wear-resistant, has excellent adhesion to the substrate, excellent water resistance and rust resistance, and can play a long-term protection in the marine atmosphere and other various harsh environments. This coating is a thick paste type coating. When high pressure airless spraying is used, the dry film thickness can reach more than 150 microns at a time.
|It is suitable for anticorrosion of steel structures such as underground pipelines, sluices, wharf steel columns, inner walls of containers, gas tanks, buried parts and underwater engineering.
|Brush, roll, high pressure airless spray.
|About 0.25 kg / m2
|Brown black, black
|About 1.3 kg / liter
|Dry film thickness
|120 ~ 150 microns
|A: B = 1: 1 (weight ratio)
|Thinner and dilution ratio
|After the A and B components are mixed well, they must be aged for 30 minutes before they can be used.
|Surface dry: 4 hours, hard dry: 24 hours
|It should be used up within 8h when the temperature is above 25 ℃, and it should not be used when it is below 5 ℃.
|More than 3 hours and no longer than 7 days.
|Front road supporting
|Epoxy zinc-rich and other workshop primers are matched or directly coated on steel plates with a derusting quality of Sa2.5.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
If you are interested in us, welcome your message, we will reply you in time!
Product Center >