coating
/
/
/
/
H52-65 Epoxy coal tar thick slurry antirust paint

Products

All categories
Number of views:
1000

Product name:
H52-65 Epoxy coal tar thick slurry antirust paint

Summary: The data, uses and recommendations of the above products are given based on tests and practical experience, and can be used as a reference during construction. This product is only suitable for professional use, use other than the formulation and construction without our knowledge, we only guarantee the quality of the coating itself. With the development of products and the accumulation of experience in use, we have the right to modify the instructions without notice.
Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Technical index
Parameters
Composition Two-filled coatings formulated from epoxy resin, coal tar pitch, pigments, fillers, curing agents, solvents, etc. When used in proportion.
Characteristic The paint film is tough, wear-resistant, has excellent adhesion to the substrate, excellent water resistance and rust resistance, and can play a long-term protection in the marine atmosphere and other various harsh environments. This coating is a thick paste type coating. When high pressure airless spraying is used, the dry film thickness can reach more than 150 microns at a time.
Use It is suitable for anticorrosion of steel structures such as underground pipelines, sluices, wharf steel columns, inner walls of containers, gas tanks, buried parts and underwater engineering.
Painting method Brush, roll, high pressure airless spray.
Theoretical dosage About 0.25 kg / m2
Colour Brown black, black
Density About 1.3 kg / liter
Dry film thickness 120 ~ 150 microns
Match A: B = 1: 1 (weight ratio)
Thinner and dilution ratio Special thinner
Maturation time After the A and B components are mixed well, they must be aged for 30 minutes before they can be used.
Drying time Surface dry: 4 hours, hard dry: 24 hours
Applicable time It should be used up within 8h when the temperature is above 25 ℃, and it should not be used when it is below 5 ℃.
Painting interval More than 3 hours and no longer than 7 days.
Flash point 22℃
Front road supporting Epoxy zinc-rich and other workshop primers are matched or directly coated on steel plates with a derusting quality of Sa2.5.
Shelf life 12 months

 

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Leave message

If you are interested in us, welcome your message, we will reply you in time!

Username used for comment:
客户留言
Description:
五星内燃机配件

Contact Us

电话
Tel:0519-85505577  
Fax:0519-85505557
E-mail:
czamb888@163.com
Website:www.ambpaint.cn 
Address: 2069 Longcheng Avenue, Zhonglou District, Changzhou City, Jiangsu Province
 

News Center   >

mobile website

 Mobile Website

Jiangsu AMB Tongfeng Coatings Co., Ltd. All Rights Reserved.     苏ICP备19046369号       Powered by:www.300.cn