HX-1 Epoxy zinc phosphate primer


All categories
Number of views:

Product name:
HX-1 Epoxy zinc phosphate primer

Summary: The data, uses and recommendations of the above products are given based on tests and practical experience, and can be used as a reference during construction. This product is only suitable for professional use, use other than the formulation and construction without our knowledge, we only guarantee the quality of the coating itself. With the development of products and the accumulation of experience in use, we have the right to modify the instructions without notice.
Retail price
Market price
Number of views:
Product serial number
Technical index
Composition This product is a two-component coating consisting of epoxy resin, corrosion inhibitor pigments, fillers, additives, curing agents, solvents, etc. as main components.
Characteristic Excellent adhesion to galvanized steel, aluminum alloy, stainless steel, aluminum oxide and other metal substrates; good anti-corrosion effect; good compactness of the coating film, no peeling, no cracks, and good permeability resistance.
Use Can be used for coating steel structures, aluminum, stainless steel, galvanized substrates, etc.
Colour Gray, zinc yellow
Density (1.3-1.5) g / ml
Flash point (Closed) 21 ℃
Match Component A: Component B = 10: 1
Recommended film thickness Dry film: 25 microns / channel
Theoretical value 0.12-0.18kg/m2
Surface treatment Before painting, the surface of the substrate should be clean, dry, flat, firm, free from grease, rust and other debris.
Construction method Suitable for conventional spraying, high pressure airless spraying, brushing, and roller coating.
Construction Conditions Construction temperature: 5-35 ℃; relative air humidity is greater than 75%. Avoid construction in rain, snow, and fog. Contact with water is prohibited.
Maturation time Use after 30 minutes of aging, the expiration date after mixing, use up within 6 hours after mixing. Temperature: 23 ± 2 ℃. As the temperature rises, the pot life is shortened.
Back road supporting Fluorocarbon paint
Thinner and dilution ratio Dilution ratio: 5-20% (mass ratio), do not dilute excessively, clean the tool with special thinner.
Full curing time 7d
Overcoating interval Minimum: 24h; Maximum: 6 months
Shelf life Store in a cool, dry place. The effective storage period is half a year.


Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Leave message

If you are interested in us, welcome your message, we will reply you in time!

Username used for comment:

Contact Us

Address: 2069 Longcheng Avenue, Zhonglou District, Changzhou City, Jiangsu Province

News Center   >

mobile website

 Mobile Website

Jiangsu AMB Tongfeng Coatings Co., Ltd. All Rights Reserved.     苏ICP备19046369号       Powered